PS ENGINEERING
PAC45 Special Mission Panel
Part No: N/A
Call for price
DESCRIPTION
PAC45 Special Mission Panel
For the special mission pilot, where hearing many radios all at the same time is part of the job, and differentiating specific radio calls is not an easy task. That is until now.
MultiTalker™, a patented technology developed by the Wright Patterson Air Force and exclusively licensed to PS Engineering, allows the pilot (and crew) to take advantage of what is sometimes referred to as the "Cocktail Party Effect". In a room crowded with many different conversations, our brain has the ability to filter out the un-important conversations while allowing pilots to pay attention to the conversation that is.
MultiTalker™ offers this unique capability to the special mission pilot, the ability to pay attention to the radio call that is important at any one instant in time. MultiTalker™ allows the pilot to place 6 individual com radio traffic, up to nine unique positions within a stereo headsets.
The PAC45 is pin compatible with the NAT AMS series making upgrading replacing legacy systems easy. The only additional wiring required is to accommodate the stereo channels for MultiTalker™ operation and the various control heads, if required.
Many enhancements included in the PAC45 include a powerful headset audio amplifier, our high-performance IntelliVox® automatic VOX circuit for very loud environments and front panel selection of Push-To-Talk Intercom. Up to three control heads can be mounted in strategic locations while the Hub can be mounted directly to the pilot's control heads or mounted remotely.
Because this is an all digital audio controller, the connections to the various control heads are just a few wires, eliminating the need to parallel radio inputs and outputs.
The ability to pre-record audio alerts makes this audio controller an integral tool to help hear alerts that may be drowned out by the din of the cockpit environment. There are no computers required to configure the PAC45 or to record the 3 audio alerts, it's all done from the front panel
The stereo audio amplifiers are capable of providing 100 milliwatts (mW) into general aviation headphones. According to PS Engineering's founder and president, “We asked helicopter pilots what they needed, they said they wanted more audio punch to get through the cockpit noise and an easy to use interface". The PAC45 delivers on all fronts.
Using the PS Engineering Bezel Generator Application, the bezel can be customized to suit perfectly each aircraft's special mission avionics suite. For example, a bezel could read Com 1, Com 2, VHF 1, VHF 2, FM 1, FM 2 and all of the various switched inputs can also be labeled accordingly. Ordering new decals for the bezel is as easy as using this bezel labeling configuration application.
Features
CHECKLIST OF CAPABILITIES:
- Six (6) COM radio Interfaces
- MultiTalker® True Dimensional Sound
- 8 place stereo IntelliVox® intercom with PTT-ICS (expandable)
- flightmate® 3 audio alerts with IntelliStore™
- Bluetooth® for cellphone and music inputs with Softmute
- Pilot and copilot CVR
- AMS Series pin compatible with a 1.88 DZUS mount
- Field configurable volume controls for unswitched & alerts
- High noise configuration (low mic gain)
- Individual volume controls for radios
- Night Vision complaint to ANVIS III
- Custom Bezels to fit application requirements
- Remote Intercom (ISO/ALL/CREW) Selector switch
- 35 second stuck PTT disconnect
- Field configurable switched settings – No computer necessary
- 5VDC to 28VDC lighting with field adjustable settings
- CALL feature with Observer Controller
- Reversionary mode
Specifications
AUDIO SELECTOR/INTERCOM: | FAA TSO C139a | APPLICABLE DOCUMENTS: | RTCA/DO-214A, RTCA/DO-160G RTCA/DO-178C, DO-254 |
VOLTAGE: | 28 VDC Systems 20.5 VDC - 32.2 VDC | MAXIMUM CURRENT: | 0.5 Amp (Externally protected by a 1A pull-type breaker) |
OPERATING TEMPERATURE: | Range Hub, -55º C to +70ºC | CONTROL HEAD: | -20º C to +55ºC |
AUDIO SELECTOR PANEL: | input impedance, 510 Ω | INTERCOM POSITIONS: | 7 places (with individual IntelliVox® circuits) |
MICROPHONE IMPEDANCE: | 150 Ω - 600 Ω | BLUETOOTH: | Radio Music and cell phone |
INPUT ISOLATION: | -60 dB (min.) | TRANSMITTER SELECTION: | 6 (COM 1, COM 2, COM 3, COM 4, COM 5, COM 6) |
UNSWITCHED INPUTS: | 4 | HEADPHONE OUTPUT: | 200 mW into 150 Ω each side (left and right) headset, no clipping <.5% THD typical |
SWITCHED RECEIVER INPUTS: | 13 (COM 1 – COM 6, TEL, NAV 1, NAV 2, Marker, AUX) | HEADPHONE IMPENDENCE: | 150 Ω - 600 Ω |
DIMENSIONS: | 1.88" (3.3 cm) Width: 5.75" (15.9 cm) Depth behind panel: 5.5" (18.16 cm) | WEIGHT: | 2.0 lb. (0.9kg) |
MUSIC INPUTS | 1 (wired) plus Bluetooth | MUSIC MUTING: | >-30 dB “Soft Mute” when Com or intercom active |
MIC FREQUENCY RESPONCE: | 3 dB: 300 Hz – 6000 Hz | MUSIC FREQUENCY RESPONCE: | 3 dB: 20 Hz – 16 kHz |
DISTORTION: | <1% THD @ 200 mW into 150 Ω |