PS ENGINEERING

PMA7000BT Audio Panel - Bluetooth

Part No: PMA7000BT

$1,695.00
Shipping calculated at checkout.
DESCRIPTION

FAA TSO’d for Certified Aircraft

The PMA7000BT  is a direct slide-in replace to the PMA7000 series, PMA6000S, PMA6000M-S, PMA6000M-S-C, UPS-AT SL-15, and the KMA-28. This means that all that is required to replace your old audio panel with this brand new panel is a 3/32 Allen Wrench! Because it is a Slide-In replacement, no rack or installation is provided, and is not available.

It is also KMA24 pin compatible, making the cost of the upgrading less expensive. None of the existing wires going to the KMA24 have to be disturbed. A new stereo intercom wire harness has to be built, which can reduce the amount of installation time.

The PMA7000BT is a hi-fi stereo  intercom system and incorporates our renown 6-place IntelliVox® automatic Voice Operated Relay (VOX) intercom system. Adjusting a squelch circuit is a thing of the past. And with over 20+ years of field experience, find out just how easy it is to forget you are even using an intercom, it just works! No more clipping or missed syllables. 

And the Bluetooth® Interface does allow music streaming as well as interconnect to an iPhone, iPad, iPod, or any other Bluetooth® enabled device that has the Handsfree or A2DP profile.

The PMA7000BT provide 3-com capability with the option to easily convert Com 3 to a full duplex cellular telephone interface.  It also has our pioneered "Split Mode". This allows the pilot to be on Com 1 while the copilot is on Com 2, freeing up the pilot to work with ATC while the copilot gets weather information or finds out just where the lowest fuel cost is on the field while still in the air.

The only knob that is on the panel is a concentric volume control for the Crew  and Passengers intercom volume. The all push button controls of the PMA7000B allows for easy selection of Coms and other Nav aids. 


    Features

    Check list of capabilities:

    • IntelliVox® automatic VOX with individually gated microphones
    • 6 Place hi-fi stereo intercom with Soft Mute™
    • Front panel music mute modes - Mute On or Mute off (ICS button)
    • Built-in Marker Beacon Receiver
    • Hardwired Satellite Telephone connection (in lieu of Com 3) which provides provides dedicated On/Off hook switches for unprecedented flexibility
    • Split mode for dual audio panel capability
    • 2  hi-fidelity stereo music source inputs 
    • 3 Isolation modes - Pilot Isolate, All, and Crew
    • 2 unswitched inputs (2 additional are available, additional wiring required.)
    • Selectable music muting for passengers
    • Selectable special intercom mode with  "Alternate Intercom Mode"
    • RAM (Radio Active Mute) eliminates constant back ground noise from radio static
    • 2-year Pro-Support Warranty
    Specifications
     RECEIVER INPUTS: 5 - Nav 1, Nav 2,ADF,AUX, DME APPROVAL BASIS: C35d Class A, C50c-Class A
    MARKER BEACON: Internal CERTIFICATION DOCUMENTS: RTCA DO-160C, DO-178B, DO-143, DO-214
    UN-SWITCHED INPUTS: 4 INTERCOM: 6-place Stereo
    POWER REQUIRED: 11-33 VDC, 1.5 A TRANSCEIVERS: 3 - Com 1, Com 2, Com 3 (or Tel Duplex)
    POWER CONSUMPTION: Speaker on, 600mA typical. 1A peak Speaker off, 350 mA OUTPUT POWER/SPEAKER HEADPHONE: 3 W into 4Ω (14V) 10W into 4Ω (28V), 50 mW into 150Ω w/o clipping, 38 mW into 150Ω, <1% distortion
    AUDIO FREQUENCY RESPONSE: ±3dB, 300Hz-6,000Hz WEIGHT: 1.5 lb
    ENTERTAINMENT FREQUENCY RESPONSE: ±3dB, 20Hz-18,000 Hz DIMENSIONS: 6.25" W x 1.3" H x 6.8" deep behind instrument panel
    ENVIRNMENTAL CONDITIONS: DO-160C A1D1/CA(MN)XXXXXXBBBBTBKXX TEMPERATURE RANGE: -15 C to +55 , with brief operation at +70 C
    ATTITUDE: 50,000 feet, unpressurized MARKER RECEIVER: 75 MHz crystal controlled receiver
    EXTERNAL MARKER: Lights and MM sense output    

     

    Questions & Answers

    See below for answers to our most popular questions.

    Have a Question?

    • Does one have to create the stereo harness, or can it just plug and play replace the kma-28

      The KMA28 had a stereo intercom internal, so assuming all the wiring is in good shape the PMA7000BT would be a slide in replacement with no wiring changes required.

    Product Reviews from Verified Customers