David Clark H10-76 - Pacific Coast Avionics
David Clark H10-76 - Pacific Coast Avionics

DAVID CLARK

David Clark H10-76

Part No: H10-76

Shipping calculated at checkout.
DESCRIPTION

David Clark Headset H10-76

Replaces the H-157/AIC headset while providing greater protection and superior performance.

David Clark H10-76 Military Headset Features:

  • Undercut Comfort-Gel Ear Seal for Improved Comfort
  • Low Impedance
  • Most popular noise attenuating headset ever produced for use with military radios
  • The standard headset of the U.S. Air Force, NATO, and most airborne command centers
  • AWAC's, under command of NATO and the United States, use the H10-76 both in the cockpit and the communication operations
  • The headset of choice of M.A.T.S. pilots
  • Also used in ground support operations
    •
    Specifications

    SPECIFICATIONS

    EAR TYPE: Dynamic MICROPHONE: M-101 Amplified Dynamic or non-amplified
    EARPHONE IMPEDANCE: 150 ohms (300 Ohms each; wired in parallel) MIC IMPEDANCE:: 5 ohms +/- 20%
    EARPHONE SENSITIVITY:: 90 dB SPL on flat plate coupler, re 1mW input @ 1KHz

    MIC SENSITIVITY:

    		 Non-amplified = .07 – 14mV @ 1khz for 103dB SPL input or Amplified = 400mV +/- 6dB into 150 ohm load @ 1kHz for 114dB SPL input
    EARPHONE FREQUENCY RESPONSE: 100 – 5,500 Hz

    MIC FREQ RESPONSE:

    		 300 – 3000Hz
    BOOM TYPE: Hinged wire COMM CORD: 5 ft. coil
    HEADPAD/HARDWARE: Super-soft, foam PLUG TYPE: U-174/U
    EAR SEALS:: Undercut, comfort-gel NRR: 27 dB
    Questions & Answers

    See below for answers to our most popular questions.

    Have a Question?